Penumatic Economic LED PCB Punching Machine With LCD Display
LED Punching Machine Description:
PCB punching machine is using a customized die tooling with bites
to cut milling joints, so that single PCBA are separated in a few
seconds from the larger PCBA panel. This separation method is
suitable for very high volume production.
LED Punching Machine Advantages:
1. Customized punching die is used, avoiding micro-cracks caused by
manual.
2. It is easy to replace and change punching dies for new
application.
3. Air cylinder driven, friendly and environmental.
4. Sensors are installed for safe operation to avoid accident.
5. High work efficiency, 8-12 seconds cycle cutting time for high
volume.
LED Punching Machine Specification:
| Working area | 330*220mm |
| Working pressure | 0.45-0.7Mpa |
| Cutting precision | ±0.05mm |
| Cycle time | 7-15 seconds |
| Output | 3-20T |
| PCB/FPC thickness | 0.08-3.5MM |
| PCB/FPC material | FPC, FR1, FR4, CEM-1, CEM-3, MCPCB |
| Cutting mode | Punching |
| Punch fixture | Die tooling(mold) |
| Working Property | LCD display, Automatically records the number of processed products, automatic punching |
| Transmission port | International standard |
| Operation Language | English |
| Stroke | 50MM |
| Mold height | 170MM |
| Power | 380/220V |
| Fuse | 3A |
| Machine dimension | 820x740x1750mm |
| Machine weight | 580kgs |
LED Punching Machine FAQ:
Q: How to replace die tooling for new application?
A: It is easy and convenient, loosen screws to remove old die
tooling, and put new die tooling on the machine then lock screws.
Q: What is your warranty?
A: 1 year for punching machine, 3 months for die tooling.
Q: What is life time of die tooling for the punching machine?
A: About 300,000-500,000 shots.
Q: What is PCB material available?
A: FR4, Alunium, FPC, etc.
Q: What is cycle punching time?
A: 7-12 seconds.
